Maxi-Nicole ~ Power Matla Innolumis
page-template,page-template-full_width,page-template-full_width-php,page,page-id-16037,qode-quick-links-1.0,ajax_fade,page_not_loaded,,qode-content-sidebar-responsive,qode-theme-ver-11.0,qode-theme-bridge,wpb-js-composer js-comp-ver-5.1.1,vc_responsive


The Maxi-Nicole LED luminaire is designed as a universally usable and functional lighting luminaire for public spaces and suitable for heights starting from 10 to 18 metres. It is made of recyclable materials like glass and aluminium and the housing comes with an “anti-fouling” powder coating, ensuring that hardly any dirt sticks to or on the housing. Maxi-Nicole has a high IP rating (IP67). The driver compartment offers space for an optional dimming unit and intelligent control. Maxi-Nicole is available in capacities of 10 to 75 watts, and in all Innolumis-light spectra. The Maxi-Nicole LED luminaire is suitable for use on all light poles with a diameter of 48-60 mm and 60-76 mm. The luminaire can easily be fitted on existing light poles, in other words on the same light pole positions, saving any extra costs, as no light poles need to be moved or added. This is not only easy but is also very much in line with our commitment to sustainability and re-use of materials. The luminaire can be elevated in increments of 5 degrees and this can be set easily using the cogged coupling of the mast piece.

Product Specs

  • Fitting material: Aluminum, ADC12 quality
    Finishing: 2 layer epoxy based powder coating
    Fitting colour: RAL 7035, other RAL colours available upon request
    Optics materials: Glass: Toughened high transmission glass. Reflector: Aluminum miro 7
    Protection degree: IP67 (dust-free and spray-proof)
    Impact resistance fixture: IK10
    Impact resistance glass: IK07
    Post diameter: 48-60 mm/60-76 mm
    Elevation angle: In increments of 5 degrees
    Maximum wind load area: Ac = 0.091 m²

  • Driver: Mean Well®
    Dimmable: Yes, 0-10 V
    Recommended dimmers: Multicontroller, Dynadimmer, Liandimmer, SDU, OLC, PLM, MidNight
    Surge protection device (SPD): Yes, > 10 KV
    Cos(phi): > 0,95
    THD: < 15%
    Insulation class: Class I
    Connector: Connector for a 3- or 5-conductor cable
    Source: 100-240 VAC 50/60Hz
    Ambient temperature: -40 °C to +50 °C

  • Number of light compartments: 4
    Expected lifetime: 20 years or 80,000 hours
    Lumen preservation: Constant Lumen Output, > 70% after 80,000 hours
    Break-down ratio: < 10% after 80,000 hours

Quality Certifications:

  • CE compliance, tested by DEKRA the Netherlands
  • ENEC & KEMA-Keur by DEKRA the Netherlands

The luminaire have been developed in accordance with:

  • IEC 60598-1: Luminaires – Part 1: General requirements and tests
  • IEC 60598-2-3: Requirements – Luminaires for road and street lighting
  • IEC 62031: LED modules for general lighting – Safety specifications
  • IEC 62471: Photobiological safety of lamps and lamp systems
  • IEC 55015: Radio disturbance characteristics of electrical lighting
  • IEC 61547: EMC immunity requirements
  • IEC 61000-3-2: Limits for Harmonics
  • IEC 61000-3-3: Limits for Voltage Fluctuations and Flicker
  • RoHS: The products meet the RoHS standard, based on the
  • European RoHS Directive 2011/65/EU

Wattage and luminous flux


Weight and Dimensions

Pole Heights

Illuminations Patern

Product Applications

Used in Minicab and Provincial road and through-fare, as well as carriage way road applications, generally in areas where there are main roads, double carriageways, on-and off raps to freeways, freeways and , with pile height of 12m to 15 m, single see, duel side, cries coos air centre double header placements, topical road classification of B1 & B2 roads,. Lighting colours generally recommend to be used will be 5000CCT blue phosphor for bright white requirements.